Soundblocker® is an acoustical underlayment and moisture barrier for use with engineered hardwood and laminate flooring. Covered by a 50-year warranty.

COVERAGE

ANTIMICROBIAL

IMPROVED SOUND ABSORPTION

SOUNDPROOFING RATINGS

CONDO APPROVED

SOUNDBLOCKER® PREMIER

PREMIUM SOUND ABSORPTION.

STRATA APPROVED.

LEARN MORE

PREMIUM FANFOLD FLOOR UNDERLAY

FOR LAMINATES & ENGINEERED FLOORS

HIGH PERFORMANCE

Quality hypoallergenic 3mm IXPE foam. Also works as a moisture barrier....

STRATA APPROVED

Proven superior sound reduction – Meets condo & strata requirements....

EASY INSTALL

Easy & Quick Install Fanfold Mat with Lip & Tape...

STC 74 / IIC 75 SUPERIOR SOUND ABSORPTION*

EXCEEDS UNIFORM BUILDING CODES

(*) IIC and STC ratings based on third-party report (Intertek, 2017).

(**) Comparison considering average ratings between mentioned materials.

ODORLESS, NON-TOXIC & ENVIRONMENT-FRIENDLY

PRODUCT SPECIFICATIONS

Underlay Type: Fanfold

Material: IXPE Foam 3mm (0.12in) with built-in lip & tape

Uses: Hardwood & Laminate Floors

Coverage: 100 ft2/box (9.29m2/box)

Dimensions (WxL): 4ft x 25ft (1.1m x 7.62m)

LIFETIME* WARRANTY

Limited Lifetime Warranty. Terms & Conditions apply.

LEARN MORE

Reduces Noise & Eliminates Hollow Sounds

Approved For Use with Radiant Heat

Quick-Cut Guidelines for Easy & Fast Installation

NOT FOR USE with WPC / Rigid Core Vinyl Products

HOW TO INSTALL

SOUNDBLOCKER® PREMIER

ACOUSTICAL UNDERLAYMENT

Installation is simple and easy with the Soundblocker®​ Premier Acoustical Underlayment. Here is how you can install your new premium underlay:

1) Ensure subfloor is clean, dry and free of any debris. Uneven areas MUST be levelled with appropriate levelling compound. Allow sufficient time for levelling compound to cure.

2) Start in a corner. Unfold the SoundBlocker®​ underlayment parallel to the wall and in the opposite direction that you plan to install the flooring planks. Make sure to have the right side facing upwards by simply following the information indicated on the mat. The lip & tape strip should face the open room.

3) Once the first mat is completely unfolded, unfold the next mat and make sure to align the seams together.

4) Remove the adhesive liner and fold the lip over the tape, connecting both mats. Press firmly the lip against the tape to ensure a strong bond.

5) Repeat the same steps for the next rows.

TIP: For odd shaped rooms, use a knife to adjust the sizing for a complete coverage of the subfloor.

GOT QUESTIONS?

REACH OUT!

Contact Us